咸鱼ZTMR实例—PS2手柄

大家好，又见面了，我是你们的朋友全栈君。

主控板：ZTMR开发板

PS2手柄

PS2 手柄是游戏机的遥控手柄。psx 系列游戏主机在全球很是畅销。不知什么时候便有人打起 PS2手柄的主意，破解了通讯协议，使得手柄可以接在其他器件上遥控使用，比如遥控我们熟悉的机器人。突出的特点是现在这款手柄性价比极高。按键丰富，方便扩展到其它应用中。

PS2 由手柄与接收器两部分组成，手柄主要负责发送按键信息。都接通电源并打开手柄开关时，手柄与接收器自动配对连接，在未配对成功的状态下，接收器绿灯闪烁，手柄上的灯也会闪烁，配对成功后，接收器上绿灯常亮，手柄上灯也常亮，这时可以按“MODE”键，选择手柄发送模式，红灯模式：遥杆输出模拟值；绿灯模式：遥杆对应上面四个按键，只有四个极限方向对应。
接收器和主机（单片机）相连，实现主机与手柄之间的通讯。

接收器引脚输出：

例程：串口打印PS2按钮信息
main.py

# main.py -- put your code here!
import ps2


def main():
  while True:
    pyb.delay(100)
    print('xycs:',ps2.ps2_key())
if __name__ == '__main__':
    main()

网上已经有开源的PS2手柄定义了， 我们保存成ps2.py文件直接保存起来就好了

ps2.py

from machine import Pin
import time
def ps2_test():
  print('test ok')
di=Pin(Pin.cpu.C6,Pin.IN,Pin.PULL_DOWN)                     
do=Pin(Pin.cpu.C7,Pin.OUT, )                                             
cs=Pin(Pin.cpu.B0,Pin.OUT,)     #PULL_UP 
clk=Pin(Pin.cpu.B1,Pin.OUT,) 

#D0 16 dat=DI
#D2 04 cmd=DO
#D3 0 CS =CS
#D4 02 CLK=CLK 
def DO_H():
  do.value(1)
def DO_L():
  do.value(0)
def CS_H ():
  cs.value(1)
def CS_L():
  cs.value(0)
def CLK_H ():
  clk.value(1)
def CLK_L():
  clk.value(0)

#常量按钮
PSB_SELECT     = 1
PSB_L3         = 2
PSB_R3         = 3
PSB_START      = 4
PSB_PAD_UP     = 5
PSB_PAD_RIGHT  = 6
PSB_PAD_DOWN   = 7
PSB_PAD_LEFT   = 8
PSB_L2         = 9
PSB_R2         = 10
PSB_L1         = 11
PSB_R1         = 12
PSB_GREEN      = 13
PSB_RED        = 14
PSB_BLUE       = 15
PSB_PINK       = 16
PSB_TRIANGLE   = 13
PSB_CIRCLE     = 14
PSB_CROSS      = 15
PSB_SQUARE     = 26
# 左摇杆
PSS_RX = 5                
PSS_RY = 6
PSS_LX = 7
PSS_LY = 8
mask=[
PSB_SELECT,
    PSB_L3,
    PSB_R3 ,
    PSB_START,
    PSB_PAD_UP,
    PSB_PAD_RIGHT,
    PSB_PAD_DOWN,
    PSB_PAD_LEFT,
    PSB_L2,
    PSB_R2,
    PSB_L1,
    PSB_R1 ,
    PSB_GREEN,
    PSB_RED,
    PSB_BLUE,
    PSB_PINK]
comd=[0x01,0x42]
data=[0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00]
def ps2_init():
  CLK_H()
  DO_H()
  time.sleep_ms(10)
def ps2_cmd(cmd):
  global data
  data[1]=0
  for ref in (1,2,4,8,16,32,64,128):
    if ( ref & cmd):
     DO_H()
    else:
     DO_L()
    CLK_H ()
    time.sleep_us(50)
    CLK_L()
    time.sleep_us(50)
    CLK_H ()
    if(di.value()==1):
     data[1]=ref|data[1]
def ps2_red():
  global data
  global comd
  CS_L()
  ps2_cmd(comd[0])
  ps2_cmd(comd[1])
  CS_H()
  if(data[1]==57):
    return 0#red light
  else:
    return 1#not red
def ps2_read():
  global data
  global comd
  byte=0
  ref=0x01
  CS_L()
  ps2_cmd(comd[0])
  ps2_cmd(comd[1])
  for byte in (2,3,4,5,6,7,8):
    for ref in (1,2,4,8,16,32,64,128):
     CLK_H ()
     CLK_L()
     time.sleep_us(50)
     CLK_H ()
     if(di.value()==1):
      data[byte]= ref|data[byte]
    time.sleep_us(50)
  CS_H ()
def ps2_clear():#ok
  global data
  for i in range(0,9,1):
    data[i]=0

def ps2_andata(button):
  global data
  return data[button]
def ps2_key():
  global data
  global mask
  ps2_clear()
  ps2_read()
  handkey=(data[4]<<8)|data[3]
  for index in (0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15):
    if (( handkey&(1<<(mask[index]-1)))==0):
     return index+2
  return 0

串口效果