WAP2标准协议文档

WAP2标准协议文档WAPForumRele nbsp WAPForumconf alongwiththe butnotyetinc Formoreinfor

WAP Forum Releases

This page lists the latest  WAP Forum conformance release, along with the specifications which are in an Approved state, but not yet included in a release. For more information about older releases, see below.

WAP2标准协议文档  WAP 2.0 conformance release
WAP2标准协议文档  Recent changes to the release
WAP2标准协议文档  DTDs associated with WAP 2.0
WAP2标准协议文档  XSLT transformation sheets associated with WAP 2.0
WAP2标准协议文档  WAP 2.0 Certification documents
WAP2标准协议文档  Related WINA information
WAP2标准协议文档  General certification documents
WAP2标准协议文档  Other Approved Specifications
WAP2标准协议文档  Informal notes
WAP2标准协议文档  Previous Specification Suite Releases







The WAP 2.0 conformance release

All specifications belonging to the WAP 2.0 release are listed below per functional area.

An archive of all technical specifications is available here: Technical_WAP2_0_ [8.8 MB] Zip file format

The WAP 2.0 release is best viewed using Adobe Acrobat® Reader version  4.05 or higher.

Changes to this release will normally be in the form of Specification Information Notes (SINs). A  SIN represents an Approved change against a previously published approved WAP Specification. SINs are used to fix bugs or otherwise revise an existing Specification in the Approved status. A SIN applies to a specific version of a Specification.

Functional area Specification PDF file format
Architecture Wireless Application Protocol Architecture Specification WAP-210-WAPArch–a
Client ID WAP Client ID Specification WAP-196-ClientID–a
Client Provisioning Provisioning architecture overview WAP-182-ProvArch–a
Provisioning Content Type Specification WAP-183-ProvCont–a
Provisioning Content Type SIN 003 WAP-183_003-ProvCont–a
Provisioning Content Type SIN 004 WAP-183_004-ProvCont–a
Provisioning Content Type SIN 005 WAP-183_005-ProvCont–a
Provisioning Bootstrap Specification WAP-184-ProvBoot–a
Provisioning Bootstrap SIN  WAP-184_001-ProvBoot–a
Provisioning User Agent Behavior  WAP-185-ProvUAB–a
Smart Card Provisioning Specification  WAP-186-ProvSC–a
External Functional Interface (EFI) External Functional Interfaces Specification  WAP-231-EFI–a
General formats General formats Specification  WAP-188-WAPGenFormats–a
Multimedia Messaging Service (MMS) Multimedia Messaging Service  
Architecture Overview 
WAP-205-MMSArchOverview–a
Multimedia Messaging Service 
Client Transaction Specification 
WAP-206-MMSCTR–a
Multimedia Messaging Service 
Client Transaction SIN 101 
WAP-206_101-MMSCTR–a
Multimedia Messaging Service 
Encapsulation Specification 
WAP-209-MMSEncapsulation–a
Persistence Persistent Storage Specification  WAP-227-PSTOR–a
Pictogram WAP Pictogram Specification  WAP-213-WAPInterPic–a
WAP Pictogram SIN  WAP-213_101-WAPInterPic–a
WAP Pictogram SIN  WAP-213_102-WAPInterPic–a
Push Push Architectural Overview  WAP-250-PushArchOverview–a
Push OTA Protocol Specification  WAP-235-PushOTA–a
Push OTA Protocol SIN  WAP-235_100-PushOTA–a
Push OTA Protocol SIN  WAP-235_101-PushOTA–a
Push Access Protocol Specification  WAP-247-PAP–a
Push Access Protocol SIN  WAP-247_100-PAP–a
Push Proxy Gateway Service Specification  WAP-249-PPGService–a
Push Proxy Gateway Service SIN  WAP-249_102-PPGService–a
Push Message Specification  WAP-251-PushMessage–a
WAP Service Indication Specification  WAP-167-ServiceInd–a
WAP Service Indication SIN  WAP-167_103-ServiceInd–a
WAP Service Loading Specification  WAP-168-ServiceLoad–a
WAP Service Loading SIN  WAP-168_103-ServiceLoad–a
WAP Cache Operation Specification  WAP-175-CacheOp–a
WAP Cache Operation SIN  WAP-175_102-CacheOp–a
Synchronisation WAP Synchronisation Specification  WAP-234-SYNC–a
User Agent Profile (UAProf) User Agent Profiling Specification   WAP-248-UAProf–a
Wireless Application Environment Wireless Application Environment Specification  WAP-236-WAESpec–a
WAP Media Types Specification  WAP-237-WAEMT–a
XHTML Mobile Profile Specification  WAP-277-XHTMLMP–a
Wireless Markup Language  version 2 Specification  WAP-238-WML–a
Wireless Markup Language version 1.3 Specification  WAP-191-WML–a
Wireless Markup Language version 1.3 SIN  WAP-191_102-WML–a
Wireless Markup Language version 1.3 SIN  WAP-191_104-WML–a
Wireless Markup Language version 1.3 SIN  WAP-191_105-WML–a
WML Transformations  Specification  WAP-244-WMLTR–a
Binary XML Content Format Specification  WAP-192-WBXML–a
Binary XML Content Format SIN 105  WAP-192_105-WBXML–a
Wireless profile Cascading Style Sheet Specification  WAP-239-WCSS–a
Wireless profile Cascading Style Sheet SIN  WAP-239_101-WCSS–a
WAP Caching Model Specification  WAP-120-WAPCachingMod–a
WMLScript Language Specification  WAP-193-WMLScript–a
WMLScript Language SIN  WAP-193_101-WMLScript–a
WMLScript Standard Libraries Specification  WAP-194-WMLScriptLibraries–a
WMLScript Standard Libraries Specification  WAP-194_103-WMLScriptLibraries–a
HTTP State Management Specification  WAP-223-HTTPSM–a
HTTP State Management SIN  WAP-223_101-HTTPSM–a
Wireless Protocols Wireless  profiled TCP Specification  WAP-225-TCP–a
Wireless profiled HTTP Specification  WAP-229-HTTP–a
Wireless profiled HTTP SIN 001  WAP-229_001-HTTP–a
WDP/WCMP Wireless Data Gateway Adaptation Specification  WAP-159-WDPWCMPAdapt–a
Wireless Datagram Protocol Specification  WAP-259-WDP–a
Wireless Control Message Protocol Specification  WAP-202-WCMP–a
WAP over GSM USSD Specification  WAP-204-WAPOverGSMUSSD–a
WAP over GSM USSD Specification  WAP-204_103-WAPOverGSMUSSD–a
Wireless Transaction Protocol Specification  WAP-224-WTP–a
Wireless Transaction Protocol Specification  WAP-224_002-WTP–a
Wireless Session Protocol Specification  WAP-230-WSP–a
End-to-end Transport Layer Security Specification  WAP-187-TransportE2ESec–a
End-to-end Transport Layer Security SIN 101  WAP-187_101-TransportE2ESec–a
Wireless Security WMLScript Crypto API Library Specification  WAP-161-WMLScriptCrypto–a
WMLScript Crypto API SIN 101  WAP-161_101-WMLScriptCrypto–a
Wireless Identity Module Specification WAP-260-WIM–a
Wireless Identity Module Specification WAP-260_100-WIM–a
Wireless Identity Module Specification WAP-260_101-WIM–a
Wireless Transport Layer Security Specification   WAP-261-WTLS–a
Wireless Transport Layer Security SIN 100  WAP-261_100-WTLS–a
Wireless Transport Layer Security SIN 101  WAP-261_101-WTLS–a
Wireless Transport Layer Security SIN 102  WAP-261_102-WTLS–a
WAP Certificate profile Specification  WAP-211-WAPCert–a
WAP Certificate profile SIN 104  WAP-211_104-WAPCert–a
WAP Certificate profile SIN 105   WAP-211_105-WAPCert–a
WAP Public Key Infrastructure Specification  WAP-217-WPKI–a
WAP Public Key Infrastructure SIN 103  WAP-217_103-WPKI–a
WAP Public Key Infrastructure SIN 105 WAP-217_105-WPKI–a
WAP TLS Profile and Tunneling Specification  WAP-219-TLS–a
WAP TLS Profile and Tunneling SIN 100  WAP-219_100-TLS–a
Wireless Telephony Application (WTA) Wireless Telephony Application Specification  WAP-266-WTA–a
Wireless Telephony Application Interface Specification WAP-268-WTAI–a
WTAI, GSM Specific Addendum  WAP-255-WTAIGSM–a
WTAI, IS-136 Specific Addendum  WAP-269-WTAIIS136–a
WTAI,  PDC Specific Addendum   WAP-270-WTAIPDC–a
WTAI,  IS95 Specific Addendum   WAP-228-WTAIIS95–a

Back to top

Recent changes to the release

Date Change Specification PDF file format
2002-11-06 One SIN added to the release WAP-224_002-WTP–a
2002-10-29 New SINs have been added to the release
2002-09-16 The SIN has been added to the release.  WAP-239_101-WCSS–a
2002-09-12 Note that a new version of a UAProf speciciation published September 9 have been revoked, due to procedural issues. The current version published on this page is the one that should be used.  WAP-248-UAProf–a
2002-08-13 The Class Conformance Requirements (CCR) for WAP 2.0 is available WAP-262-ClassConform–a
The following SINs have been added to the release WAP-191_105-WML–a
WAP-235_101-PushOTA–a
2002-07-18 The previously published zip file with all specifications and SINs belonging to WAP 2.0 was faulty and has been replaced  
2002-06-10 The DTD for XHTMLMP 1.0 contained a bug in thexhtml-mobile10-model-1.mod file. This has been corrected and the corresponding zip file has also been updated. zip file
2002-06-04 New SINs added to the release WAP-183_005-ProvCont–a
WAP-194_103-WMLScriptLibraries–a
New baseline document created, incorporating SINs written against it WAP-236-WAESpec–a
2002-03-22 Two SINs added to the release WAP-261_101-WTLS–a
WAP-261_102-WTLS–a
2002-02-11 The following specification has been updated to incorporate SINs written against it WAP-206-MMSCTR–a
2002-01-22 Two additional SINs added to the release WAP-213_101-WAPInterPic–a
WAP-213_102-WAPInterPic–a
2002-01-21 The WAP-238-WML–a was not generated correctly and has been replaced with a new, readable version WAP-238-WML–a
2002-01-18 The WAP 2.0 release has been completed (all specification have been approved). New versions available of the following specifications WAP-236-WAESpec–a
WAP-237-WAEMT–a
WAP-238-WML–a
WAP-239-WCSS–a
WAP-244-WMLTR–a 
WAP-277-XHTMLMP–a




The WML 1.3 specification has also been added along with the corresponding SINs WAP-191-WML–a
WAP-191_102-WML–a
WAP-191_104-WML–a

Also, the following specifications have been updated to incorporate all of the SINs written against them:  WAP-209-MMSEncapsulation–a
WAP-227-PSTOR–a
WAP-231-EFI–a

2001-12-07 The following SINs have been added to the release:  WAP-183_004-ProvCont–a
WAP-187_101-TransportE2ESec–a
WAP-192_105-WBXML–a
WAP-206_101-MMSCTR–a 
WAP-209_102-MMSEncapsulation–a
WAP-211_104-WAPCert–a
WAP-217_103-WPKI–a
WAP-219_100-TLS–a
WAP-229_001-HTTP–a
WAP-231_100-EFI–a 
WAP-261_100-WTLS–a









The UAProf specification has been approved as a part of WAP 2.0, including SINs 100, 101 and 102, WAP-248-UAProf–a
2001-11-06 The following SINs have been added to the release WAP-167_103-ServiceInd–a
WAP-168_103-ServiceLoad–a
WAP-175_102-CacheOp–a
WAP-184_001-ProvBoot–a 
WAP-193_101-WMLScript–a
WAP-223_101-HTTPSM–a
WAP-235_100-PushOTA–a
WAP-247_100-PAP–a 
WAP-249_102-PPGService–a 







2001-10-10 The following SINs have been added to the release WAP-161_101-WMLScriptCrypto–a 
WAP-183_003-ProvCont–a
2001-09-28 The push architecture overview has been approved as a WAP 2.0 specification and the approved version of the document has been made available at the site WAP-250-PushArchOverview–a
A SIN for the GSM over USSD specification has been added WAP-204_103-WAPOverGSMUSSD–a 
2001-09-13 The DTD for client provisioning has been corrected,see Provisioning DTD
2001-08-17 The persistent storage specification has been approved as a WAP 2.0 specification and the approved version of the document has been made available at the site WAP-227-PSTOR–a

Back to top

DTDs associated with WAP 2.0

A Document Type Definition (DTD) is a formal description in XML declaration syntax of a particular type of document. It sets out what names are to be used for the different types of element, where they may occur, and how they all fit together. The following DTDs are associated with WAP 2.0:   

DTDs associated with WAP 2.0
Channel 1.2 DTD:  http://www.wapforum.org/DTD/channel12.dtd 
XHTMLMP 1.0 DTDs available as a zip file or :
http://www.wapforum.org/DTD/xhtml-mobile10.dtd
http://www.wapforum.org/DTD/xhtml-mobile10-flat.dtd
http://www.wapforum.org/DTD/xhtml-mobile10-model-1.mod 

WML 2.0 DTDs available as a zip file or:
http://www.wapforum.org/DTD/wml20.dtd 
http://www.wapforum.org/DTD/wml20-flat.dtd 
http://www.wapforum.org/DTD/wml-deprecated-1.mod 
http://www.wapforum.org/DTD/wml-framework-1.mod 
http://www.wapforum.org/DTD/wml-special-1.mod 
http://www.wapforum.org/DTD/wml-qname-1.mod 
http://www.wapforum.org/DTD/wml20-model-1.mod 






WAP Push DTDs  http://www.wapforum.org/DTD/pap_2.0.dtd 
http://www.wapforum.org/DTD/si.dtd 
http://www.wapforum.org/DTD/sl.dtd 

WAP Client Provisioning DTD http://www.wapforum.org/DTD/prov.dtd 
WTA DTD http://www.wapforum.org/DTD/wta-wml12.dtd 
(it is recommended to use the WML2 DTD for WTA in this release)

XSLT transformation sheets associated with WAP 2.0

As a part of WAP 2.0, an XSLT transformation sheet has been defined to convert WML1.3 to WML2.0. Transformation is needed to support backwards compatibility in the case that an implementation of WAP 2.0 relies on a common WML2.0 user agent rather than a dual-browser with a WML1.3 user agent and an XHTML Basic Profile user agent. The following XSLT transformation sheet is associated with WAP 2.0: http://www.wapforum.org/xslt/wap-244-wmltr.xsl

Back to top

WAP 2.0 Certification documents

WAP-262, WAP 2.0 Class Conformance Requirements WAP-262-ClassConform–a PDF file format

Related WINA information

See OMNA page.

General certification documents

The following documents PDF file format are applicable for all WAP Forum conformance releases after WAP 1.1.

Back to top

Other Approved Specifications

The following specifications have been approved by the WAP Forum, but have not yet been included in a conformance release. These specifications will be rolled into the next conformance release. All PDF file format files

WAP-256, WAP Location Framework Overview Specification WAP-256-LOCFW–a
WAP-257, WAP Location Protocols Specification WAP-257-LOCPROT–a
WAP-258, WAP Location XML Document Formats Specification WAP-258-LOCFW–a
WAP-263, WAP External Functional Interface Class Definition Process WAP-263-EFICDP–a
WAP-267, WAP External Functional Interface Manage Application Class WAP-267-EFIMAC–a

Informal notes

This section lists the WAP Forum(tm) Informal Notes. An Informal Note document represented the output of an officially chartered WAP Forum(tm) working group.

Informal Notes had no official WAP Forum(tm) status, and are not ratified or endorsed by the Open Mobile Alliance. Informal Notes were intended as a means by which a Working Group can publish information that may be of interest to the public, but which were not appropriate for the formal Specification process of the WAP Forum(tm).

WAP 218 – Wireless Application Protocol – Best Practices and  Recommentations for authoring WML content in a generic fashion WAP-218-GCAG–d.pdf

Releases Archives Zip File Size Associated DTDs
WAP 1.2.1 (June 2000)
7.45 MB
http://www.wapforum.org/DTD/wml13.dtd
http://www.wapforum.org/DTD/pap_1.0.dtd
WAP 1.2
5.73 MB
http://www.wapforum.org/DTD/pap_1.0.dtd
WAP 1.1
2.79 MB
http://www.wapforum.org/DTD/wml_1_1.dtd
WAP 1.0
2.99 MB
 

 

版权声明:本文内容由互联网用户自发贡献,该文观点仅代表作者本人。本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如发现本站有涉嫌侵权/违法违规的内容, 请联系我们举报,一经查实,本站将立刻删除。

发布者:全栈程序员-站长,转载请注明出处:https://javaforall.net/209077.html原文链接:https://javaforall.net

(0)
上一篇 2026年3月19日 上午10:05
下一篇 2026年3月19日 上午10:05


相关推荐

  • ASP.NET中 TextBox(文本框)的使用

    ASP.NET中 TextBox(文本框)的使用

    2022年3月7日
    38
  • 解决进入vi 显示E325

    解决进入vi 显示E325在网上找了大量的帖子,有的有用,有的无用,今天自己摸索了一个办法,在命令端输入rm空格-rf空格图片中的箭头位置,这个位置是你创建的例如vim1.c回车后出现如图就一直回车回到vim页面进入命令模式输入:q!回车回到终端输入rm-rf.1.c.swp回车再重新进入…

    2022年5月19日
    106
  • 七大MCP 支持的主流 AI 框架大盘点

    七大MCP 支持的主流 AI 框架大盘点

    2026年3月14日
    1
  • 那些常见的C++、Qt基础面试题「建议收藏」

    那些常见的C++、Qt基础面试题「建议收藏」前言又到了金三银四的季节,每年这个时候都是跳槽的高峰期,在整理电脑资料的过程中发现一些之前记录的面试过程中最常提到的C++和Qt相关问题,其实都是些很基础的知识点,但是在面试过程中出镜率非常高。总结如下,暂不附答案,仅供参考。正文废话不多说,直接上题。C++基础篇1.线程同步的方式有哪些2.线程间通信如何实现3.进程间通信如何实现4.IO模型用过哪些5.IO实现的方式有哪些6.用过哪些STL7.迭代器实现怎么产生的,如何避免8.vector、list、map实现原理9.如何实现多

    2022年6月25日
    55
  • 手把手教你如何重装win10系统(win10怎么自己重装系统)

    **Win10系统重装教程(纯净版)**PS:红字部分事关电脑安危和个人信息安全,重装系统前必看重要提示➢准备8G或8G以上的空U盘。(制作U盘会格式化U盘,U盘内重要数据要事先备份好)。➢为了保证电脑内的资料安全,安装系统前需要将电脑内所有磁盘的所有重要数据备份到移动储存介质(不要备份到安装系统使用的U盘)。➢如有预装Office,务必记住自己激活Office时使用的Micr…

    2022年4月12日
    79
  • 安卓so文件解密_Android是什么文件

    安卓so文件解密_Android是什么文件作者论坛账号:genliese1.前言一道so文件动态加解密的CrackMe,运行时解密要执行的函数,且在执行后立马加密CrackMe:dex文件加的数字壳,so文件无壳,因为反调试,所以so文件采用全静态分析分析环境:脱壳工具:FARTGDAIDAFridaPyCharmVSCode2.分析过程2.1脱壳拿到FART定制ROM下跑,得到想要的dex文件,数字壳抹去了前八个字节的dex文件魔…

    2025年11月13日
    6

发表回复

您的邮箱地址不会被公开。 必填项已用 * 标注

关注全栈程序员社区公众号