Luci配置文件

Luci配置文件部分文件 仅供参考 具体使用请参照官方说明 http luci subsignal org api luci modules luci model uci html1 batmandconfi optioninterf ath0 optionannoun optiongatewa class optionorig

部分文件,仅供参考,具体使用请参照官方说明:http://luci.subsignal.org/api/luci/modules/luci.model.uci.html

1.batmand


config batmand general option interface ath0 option announce option gateway_class option originator_interval option preferred_gateway option routing_class option visualisation_srv option policy_routing_script

2.ddns

config service "myddns" option enabled "0" option service_name "dyndns.org" option domain "mypersonaldomain.dyndns.org" option username "myusername" option password "mypassword" option ip_source "network" option ip_network "wan" option force_interval "72" option force_unit "hours" option check_interval "10" option check_unit "minutes" #option ip_source "interface" #option ip_interface "eth0.1" #option ip_source "web" #option ip_url "http://www.whatismyip.com/automation/n0.asp" #option update_url "http://[USERNAME]:[PASSWORD]@members.dyndns.org/nic/update?hostname=[DOMAIN]&myip=[IP]" 

3.dhcp


config dnsmasq option domainneeded 1 option boguspriv 1 option filterwin2k '0' #enable for dial on demand option localise_queries 1 option local '/lan/' option domain 'lan' option expandhosts 1 option nonegcache 0 option authoritative 1 option readethers 1 option leasefile '/tmp/dhcp.leases' option resolvfile '/tmp/resolv.conf.auto' config dhcp option interface lan option start 100 option limit 150 option leasetime 12h config dhcp option interface wan option ignore 1

4.dropbear

config dropbear option PasswordAuth 'on' option Port '22'


5.firewall

config defaults option syn_flood 1 option input DROP option output ACCEPT option forward DROP config zone option name lan option input ACCEPT option output ACCEPT option forward DROP config zone option name wan option input DROP option output ACCEPT option forward DROP option masq 1 config forwarding option src lan option dest wan EXAMPLE CONFIG SECTIONS # do not allow a specific ip to access wan #config rule # option src lan # option src_ip 192.168.45.2 # option dest wan # option proto tcp # option target REJECT # block a specific mac on wan #config rule # option dest wan # option src_mac 00:11:22:33:44:66 # option target REJECT # block incoming ICMP traffic on a zone #config rule # option src lan # option proto ICMP # option target DROP # port redirect port coming in on wan to lan #config redirect # option src wan # option src_dport 80 # option dest lan # option dest_ip 192.168.16.235 # option dest_port 80 # option protocol tcp # include a file with users custom iptables rules #config include # option path /etc/firewall.user FULL CONFIG SECTIONS #config rule # option src lan # option src_ip 192.168.45.2 # option src_mac 00:11:22:33:44:55 # option src_port 80 # option dest wan # option dest_ip 194.25.2.129 # option dest_port 120 # option proto tcp # option target REJECT #config redirect # option src lan # option src_ip 192.168.45.2 # option src_mac 00:11:22:33:44:55 # option src_port 1024 # option src_dport 80 # option dest_ip 194.25.2.129 # option dest_port 120 # option proto tcp


6.fatab

config mount option target /home option device /dev/sda1 option fstype ext3 option options rw,sync option enabled 0 config swap option device /dev/sda2 option enabled 0


7.httpd

config 'httpd' option 'port' '80' option 'home' '/www'

8.luci

config 'core' 'main' option 'lang' 'auto' option 'resourcebase' '/luci-static/resources' option '_niuinit' '1' option 'mediaurlbase' '/luci-static/Todaair' config 'extern' 'flash_keep' option 'uci' '/etc/config/' option 'dropbear' '/etc/dropbear/' option 'openvpn' '/etc/openvpn/' option 'passwd' '/etc/passwd' option 'opkg' '/etc/opkg.conf' option 'firewall' '/etc/firewall.user' option 'uploads' '/lib/uci/upload/' config 'internal' 'languages' option 'pt_br' 'Português (Brasil)' option 'de' 'Deutsch' option 'fr' 'Français' option 'he' 'עִבְרִית' option 'es' 'Español' option 'ro' 'Română' option 'it' 'Italiano' option 'pt' 'Português' option 'no' 'Norsk' option 'ru' 'Русский' option 'ms' 'Bahasa Melayu' option 'ja' '日本語' option 'ca' 'Català' option 'el' 'Ελληνικά' option 'vi' 'Tiếng Việt' option 'en' 'English' option 'zh_cn' 'chinese' config 'internal' 'sauth' option 'sessionpath' '/tmp/luci-sessions' option 'sessiontime' '3600' config 'internal' 'ccache' option 'enable' '1' config 'internal' 'themes' option 'Fledermaus' '/luci-static/fledermaus' option 'Todaair' '/luci-static/Todaair' option 'Freifunk_BNO' '/luci-static/freifunk-bno' option 'OpenWrt' '/luci-static/openwrt.org' option 'Freifunk' '/luci-static/freifunk' option 'MyTheme' '/luci-static/Todaair' option 'Freifunk_Hannover' '/luci-static/freifunk-hannover' option 'Freifunk_Generic' '/luci-static/freifunk-generic' option 'OpenWrtOxygen' '/luci-static/openwrt.org-oxygen' option 'Oxygen' '/luci-static/oxygen'


9.lucid

config lucid main option pollinterval 15000 option daemon 1 option debug 1 list supports tcpserver list supports server config DirectoryPublisher webroot option name 'Webserver Share' option physical host/www option virtual '' option domain '' config LuciWebPublisher luciweb option name 'LuCI Webapplication' option physical '' list virtual /luci option domain '' option home 1 config RPCPublisher mainrpc option namespace 'luci.lucid.rpc' list export system list export ruci list exec ':lo' list exec 'root' config tcpserver httpd option entrypoint "luci.lucid.http" list supports DirectoryPublisher list supports LuciWebPublisher config tcpserver rpcd option entrypoint "luci.lucid.rpc" list supports RPCPublisher config daemon http option slave httpd list address 8080 list publisher webroot list publisher luciweb option enabled 1 config daemon https option slave httpd list address 4443 list publisher webroot list publisher luciweb option enabled 1 option encryption enable option tls sdk_tls config tls sdk_tls option generate 1 option key /tmp/lucid-tls.key option cert /tmp/lucid-tls.cert option type asn1 config daemon rpc option slave rpcd list address 12900 list publisher mainrpc option enabled 1 config 'daemon' 'splashr' option 'slave' 'httpd' list 'address' '8082' list 'publisher' 'splashredir' option 'enabled' '1' config 'Redirector' 'splashredir' option 'name' 'Splashd' option 'virtual' '/' option 'physical' ':80/luci/splash'


10.luci_devinfo

config 'smap_scannet' 'SIP_LAN' option 'enable' '0' option 'interface' 'lan' option 'subnet' '192.168.99.0/24' option 'ports' '5060' option 'timeout' '10' option 'repeat_count' '1' option 'sleepreq' '100' config 'smap_scannet' 'SIP_WAN' option 'enable' '0' option 'interface' 'wan' option 'subnet' '216.218.0.0/16' config 'netdiscover_scannet' 'SCAN_LAN' option 'enable' '0' option 'interface' 'lan' option 'subnet' '192.168.99.0/24' config 'netdiscover_scannet' 'SCAN_WAN' option 'enable' '0' option 'interface' 'wan' option 'subnet' '216.218.0.0/16' option 'ports' '5060' option 'timeout' '10' option 'repeat_count' '1' option 'sleepreq' '100'


11.luci_olsr

config 'olsr' 'general' option 'resolve' '1'


12.luci_splash

config core general option leasetime 1


13.luci_statistics

config 'statistics' 'rrdtool' option 'default_timespan' '1hour' option 'image_width' '600' option 'image_path' '/tmp/rrdimg' config 'statistics' 'collectd' option 'BaseDir' '/var/run/collectd' option 'Include' '/etc/collectd/conf.d' option 'PIDFile' '/var/run/collectd.pid' option 'PluginDir' '/usr/lib/collectd' option 'TypesDB' '/usr/share/collectd/types.db' option 'Interval' '30' option 'ReadThreads' '2' config 'statistics' 'collectd_ping' option 'enable' '0' option 'TTL' '127' option 'Interval' '30' option 'Hosts' '127.0.0.1' config 'statistics' 'collectd_csv' option 'enable' '0' option 'StoreRates' '0' option 'DataDir' '/tmp' config 'statistics' 'collectd_df' option 'enable' '0' option 'Devices' '/dev/mtdblock/4' option 'MountPoints' '/jffs' option 'FSTypes' 'tmpfs' option 'IgnoreSelected' '0' config 'statistics' 'collectd_disk' option 'enable' '0' option 'Disks' 'hda1 hdb' option 'IgnoreSelected' '0' config 'statistics' 'collectd_dns' option 'enable' '0' option 'Interfaces' 'ffdhcp ff br-lan' option 'IgnoreSources' '127.0.0.1' config 'statistics' 'collectd_email' option 'enable' '0' option 'SocketFile' '/var/run/collectd/email.sock' option 'SocketGroup' 'nogroup' config 'statistics' 'collectd_exec' option 'enable' '1' config 'collectd_exec_input' option 'cmdline' '/usr/bin/stat-input-olsr' config 'collectd_exec_notify' option 'cmdline' '/usr/bin/stat-output-syslog' config 'statistics' 'collectd_interface' option 'enable' '1' option 'Interfaces' 'br-lan br-ff' option 'IgnoreSelected' '0' config 'statistics' 'collectd_iptables' option 'enable' '1' config 'collectd_iptables_match' option 'table' 'nat' option 'chain' 'luci_fw_postrouting' option 'target' 'MASQUERADE' option 'source' '192.168.1.0/24' option 'outputif' 'br-ff' option 'name' 'Verkehr LAN-Clients' config 'collectd_iptables_match' option 'chain' 'luci_fw_postrouting' option 'table' 'nat' option 'target' 'MASQUERADE' option 'source' '10.61.230.0/24' option 'outputif' 'br-ff' option 'name' 'Verkehr WLAN-Clients' config 'statistics' 'collectd_irq' option 'enable' '0' option 'Irqs' '2 3 4 7' config 'statistics' 'collectd_load' option 'enable' '1' config 'statistics' 'collectd_logfile' option 'enable' '0' option 'LogLevel' 'notice' option 'File' '/var/log/collectd.log' option 'Timestamp' '1' config 'statistics' 'collectd_netlink' option 'enable' '0' option 'IgnoreSelected' '0' option 'VerboseInterfaces' 'br-lan br-ff' option 'QDiscs' 'br-lan br-ff' config 'statistics' 'collectd_network' option 'enable' '0' config 'collectd_network_listen' option 'host' '0.0.0.0' config 'collectd_network_server' option 'host' '0.0.0.0' config 'statistics' 'collectd_processes' option 'enable' '1' config 'statistics' 'collectd_tcpconns' option 'enable' '1' option 'ListeningPorts' '0' option 'LocalPorts' '22 80' config 'statistics' 'collectd_unixsock' option 'enable' '0' option 'SocketFile' '/var/run/collectd/query.sock' option 'SocketGroup' 'nogroup' config 'statistics' 'collectd_wireless' option 'enable' '1' config 'statistics' 'collectd_cpu' option 'enable' '1' config 'statistics' 'collectd_rrdtool' option 'enable' '1' option 'DataDir' '/tmp' option 'RRARows' '100' option 'RRASingle' '1' option 'RRATimespans' '10min 1hour 1day 1week 1month 1year'

14.mactodevinfo

config 'mactodevinfo' option 'maclow' '00:19:15:00:00:00' option 'machigh' '00:19:15:ff:ff:ff' option 'vendor' 'Vertical Communications' option 'devtype' 'SIP devices' option 'model' 'varies' option 'ouiowneroverride' 'Some company' option 'name' 'Vertical XIP and Phones'

15.network

# VLAN configuration config switch eth0 option vlan0 "0 1 2 3 5*" option vlan1 "4 5" # Loopback configuration config interface loopback option ifname "lo" option proto static option ipaddr 127.0.0.1 option netmask 255.0.0.0 # LAN configuration config interface lan option type bridge option ifname "eth0" option proto static option ipaddr 192.168.1.1 option netmask 255.255.255.0 # WAN configuration config interface wan option ifname "wlan0" option proto dhcp

16.ntpclient

config ntpserver option hostname '0.openwrt.pool.ntp.org' option port '123' config ntpserver option hostname '1.openwrt.pool.ntp.org' option port '123' config ntpserver option hostname '2.openwrt.pool.ntp.org' option port '123' config ntpserver option hostname '3.openwrt.pool.ntp.org' option port '123' config ntpdrift option freq '0' config ntpclient option interval 60 #option count 10


17.openvpn_recipes

# # Routed point-to-point server # config openvpn_recipe server_tun_ptp option _description "Simple server configuration for a routed point-to-point VPN" option _role "server" option dev "tun" option ifconfig "10.0.0.1 10.0.0.2" option secret "shared-secret.key" option keepalive "10 60" option comp_lzo "1" option verb "3" option mssfix "1420" option management "127.0.0.1 31194" # # Routed point-to-point client # config openvpn_recipe client_tun_ptp option _description "Simple client configuration for a routed point-to-point VPN" option _role "client" option dev "tun" list remote "vpnserver.example.org" option ifconfig "10.0.0.2 10.0.0.1" option secret "shared-secret.key" option nobind "1" option comp_lzo "1" option verb "3" option management "127.0.0.1 31194" # # Routed multi-client server # config openvpn_recipe server_tun option _description "Server configuration for a routed multi-client VPN" option _role "server" option dev "tun" option server "10.0.100.0 255.255.255.0" option ca "ca.crt" option cert "server.crt" option key "server.key" option dh "dh1024.pem" option keepalive "10 60" option comp_lzo "1" option verb "3" option mssfix "1420" option management "127.0.0.1 31194" # # Routed client # config openvpn_recipe client_tun option _description "Client configuration for a routed multi-client VPN" option _role "client" option client "1" option dev "tun" list remote "vpnserver.example.org" option pkcs12 "my_client.p12" option remote_cert_tls "server" option comp_lzo "1" option nobind "1" option persist_key "1" option persist_tun "1" option verb "3" option reneg_sec "0" option float "1" option management "127.0.0.1 31194" # # Multi-client ethernet bridge server # config openvpn_recipe server_tap_bridge option _description "Server configuration for an ethernet bridge VPN" option _role "server" option dev "tap" option server_bridge "192.168.1.1 255.255.255.0 192.168.1.128 192.168.1.254" option ca "ca.crt" option cert "server.crt" option key "server.key" option dh "dh1024.pem" option keepalive "10 60" option comp_lzo "1" option verb "3" option mssfix "1420" option management "127.0.0.1 31194" # # Ethernet bridge client # config openvpn_recipe client_tap_bridge option _description "Client configuration for an ethernet bridge VPN" option _role "client" option client "1" option dev "tap" list remote "vpnserver.example.org" option ca "ca.crt" option cert "my_client.crt" option key "my_client.key" option dh "dh1024.pem" option remote_cert_tls "server" option comp_lzo "1" option nobind "1" option persist_key "1" option verb "3" option reneg_sec "0" option float "1" option management "127.0.0.1 31194"

18.pbx

config 'main' 'connection_status'

19.pbx-advanced

config 'settings' 'advanced' option 'useragent' 'PBX' option 'ringtime' '30' option 'rtpstart' '19850' option 'rtpend' '19900'


20.pbx-calls

config 'call_routing' 'outgoing_calls' config 'call_routing' 'incoming_calls' config 'call_routing' 'providers_user_can_use' config 'call_routing' 'blacklisting'

21.pbx-google


22.pbx-users


config 'user' 'server'

22.pbx-voicemail

config 'voicemail' 'global_voicemail' config 'voicemail' 'voicemail_smtp' config 'voicemail' 'voicemail_log'

23.pbx-voip


24.qos


# QoS configuration for OpenWrt # INTERFACES: config interface wan option classgroup "Default" option enabled 1 option overhead 1 option upload 128 option download 1024 # RULES: config classify option target "Bulk" option ipp2p "all" config classify option target "Bulk" option layer7 "edonkey" config classify option target "Bulk" option layer7 "bittorrent" config classify option target "Priority" option ports "22,53" config classify option target "Normal" option proto "tcp" option ports "20,21,25,80,110,443,993,995" config classify option target "Express" option ports "5190" config default option target "Express" option proto "udp" option pktsize "-500" config reclassify option target "Priority" option proto "icmp" config default option target "Bulk" option portrange "1024-65535" config reclassify option target "Priority" option proto "tcp" option pktsize "-128" option mark "!Bulk" option tcpflags "SYN" config reclassify option target "Priority" option proto "tcp" option pktsize "-128" option mark "!Bulk" option tcpflags "ACK" # Don't change the stuff below unless you # really know what it means :) config classgroup "Default" option classes "Priority Express Normal Bulk" option default "Normal" config class "Priority" option packetsize 400 option maxsize 400 option avgrate 10 option priority 20 config class "Priority_down" option packetsize 1000 option avgrate 10 config class "Express" option packetsize 1000 option maxsize 800 option avgrate 50 option priority 10 config class "Normal" option packetsize 1500 option packetdelay 100 option avgrate 10 option priority 5 config class "Normal_down" option avgrate 20 config class "Bulk" option avgrate 1 option packetdelay 200


25.siit

config siit ipv4 option pool "77.87.52.0/22" option netsize "29" config siit ipv6 option ula_prefix "fd00::" option ula_global "00ca:ffee:babe::" option ula_subnet "0000:0000:0000:dada::" option siit_prefix "::ffff:0000:0000" config siit wifi option essid "6mesh.freifunk.net" option bssid "02:25:c3:ca:ff:ee" option channel "1"

26.system


config 'system' option 'hostname' 'OpenWrt' option 'zonename' 'UTC' option 'timezone' 'GMT0' option 'conloglevel' '8' option 'cronloglevel' '8'

27.ucitrack

config 'network' option 'init' 'network' list 'affects' 'dhcp' list 'affects' 'radvd' config 'wireless' list 'affects' 'network' config 'firewall' option 'init' 'firewall' list 'affects' 'luci-splash' list 'affects' 'qos' list 'affects' 'miniupnpd' config 'olsr' option 'init' 'olsrd' config 'dhcp' option 'init' 'dnsmasq' config 'dropbear' option 'init' 'dropbear' config 'httpd' option 'init' 'httpd' config 'fstab' option 'init' 'fstab' config 'qos' option 'init' 'qos' config 'system' option 'init' 'led' list 'affects' 'luci_statistics' config 'luci_splash' option 'init' 'luci_splash' config 'upnpd' option 'init' 'miniupnpd' config 'ntpclient' option 'init' 'ntpclient' config 'samba' option 'init' 'samba' config 'tinyproxy' option 'init' 'tinyproxy' config 'meshwizard' 'meshwizard' option 'exec' '/etc/init.d/wizard boot' config 'p910nd' option 'init' 'p910nd' config 'radvd' option 'init' 'radvd' config 'freifunk_p2pblock' option 'init' 'freifunk-p2pblock' config 'luci_statistics' option 'init' 'luci_statistics' config 'ushare' option 'init' 'ushare' config 'olsrd' option 'init' 'olsrd' config 'vnstat' option 'init' 'vnstat' config 'mmc_over_gpio' option 'init' 'mmc_over_gpio' config 'polipo' option 'init' 'polipo' config 'ahcpd' option 'init' 'ahcpd' config 'hd-idle' option 'init' 'hd-idle' config 'wshaper' 'wshaper' option 'exec' '/etc/init.d/wshaper start'

28.upnpd

config upnpd config option log_output 0 option download 1024 option upload 512


29.wireless

config wifi-device wifi0 option type atheros option channel auto option disabled 0 config wifi-iface option device wifi0 option network lan option mode ap option ssid OpenWrt option encryption none # Fake active wifi option ifname ath0 option up 1 


















































































































































版权声明:本文内容由互联网用户自发贡献,该文观点仅代表作者本人。本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如发现本站有涉嫌侵权/违法违规的内容, 请联系我们举报,一经查实,本站将立刻删除。

发布者:全栈程序员-站长,转载请注明出处:https://javaforall.net/210466.html原文链接:https://javaforall.net

(0)
上一篇 2026年3月19日 上午7:37
下一篇 2026年3月19日 上午7:37


相关推荐

  • 微信小程序–》小程序生命周期和WXS使用

    微信小程序–》小程序生命周期和WXS使用浅讲生命周期和 WXS 的使用

    2026年3月16日
    3
  • STM32F103驱动GT911

    STM32F103驱动GT9110x00引脚连接://SCL——-PB10//SDA——-PB11//INT——–PB1//RST——–PB2IIC的SCL与SDA需要接上拉电阻!0x01模拟IIC:在模拟IIC的头文件中:定义所需的IO操作宏://IO操作函数#defineIIC_SCLPBout(10)//…

    2022年6月30日
    34
  • UML工具到底哪个更好用

    UML工具到底哪个更好用经典如EnterpriseArchitect美丽如MagicDrawUML免费如StarUML容易上手visioRose商业PowerDesigner很早的UML建模工具用的广泛评价好,可以直接生成数据库脚本试试VS2010版,里面自带有UML开发工具EA文档生成RTF格式很好使,对UML的支持也比较好,正向/反向工程都还可以ROSE太大…

    2022年7月16日
    23
  • webpack(2)webpack核心概念「建议收藏」

    webpack(2)webpack核心概念「建议收藏」前言本质上,webpack是一个用于现代JavaScript应用程序的静态模块打包工具。当webpack处理应用程序时,它会在内部构建一个依赖图(dependencygraph),此

    2022年7月31日
    7
  • 如何设计单元测试用例「建议收藏」

    如何设计单元测试用例「建议收藏」如何编写单元测试用例(白盒测试)。一、单元测试的概念单元通俗的说就是指一个实现简单功能的函数。单元测试就是只用一组特定的输入(测试用例)测试函数是否功能正常,并且返回了正确的输出。测试的覆盖种类1.语句覆盖:语句覆盖就是设计若干个测试用例,运行被测试程序,使得每一条可执行语句至少执行一次。2.判定覆盖(也叫分支覆盖…

    2022年6月18日
    34
  • JavaScript四舍五入并保留两位小数

    JavaScript四舍五入并保留两位小数在 JavaScript 中 有一个问题一直被没有很好地解决 就是小数点保留指定的位数 也就是我们通常说的 Math Round 函数 首先 JavaScript 有自带的 Math Round 函数 但是返回的是个整数 无法精确到小数点后 Number toFixed 方法 能保留小数点后面的指定位数 但如果执行 2 1 toFixed 2 的话 会返回 2 10 而不是我们期待的 2 1 所以 这个方法也不太可取

    2026年3月18日
    2

发表回复

您的邮箱地址不会被公开。 必填项已用 * 标注

关注全栈程序员社区公众号