[root@server2 opt]#wget ftp://ftp.netperf.org/netperf/netperf-2.4.5.tar.gz
[root@server2 opt]# tar xzvf netperf-2.4.5.tar.gz
[root@server2 opt]# make && make install
按照以上方法分别在两台linux服务器上安装；
分为服务端和客户端
服务端启动如下：
[root@server2 opt]#netserver
Starting netserver at port 12865
Starting netserver at hostname 0.0.0.0 port 12865 and family AF_UNSPEC
[root@server2 opt]#
在客户端使用如下命令测试
[root@server1 etc]# netperf -H 10.10.10.131 -l 60
TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.10.10.131 (10.10.10.131) port 0 AF_INET
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
87380 16384 16384 60.01 291.03
[root@server1 etc]# netperf -H 10.10.10.131
TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.10.10.131 (10.10.10.131) port 0 AF_INET
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
87380 16384 16384 10.00 289.18
[root@server1 etc]# netperf -H 10.10.10.131 -c
TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.10.10.131 (10.10.10.131) port 0 AF_INET
Recv Send Send Utilization Service Demand
Socket Socket Message Elapsed Send Recv Send Recv
Size Size Size Time Throughput local remote local remote
bytes bytes bytes secs. 10^6bits/s % S % U us/KB us/KB
87380 16384 16384 10.00 294.17 99.60 -1.00 27.737 -1.000
[root@server1 etc]# netperf -H 10.10.10.131 -C
TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.10.10.131 (10.10.10.131) port 0 AF_INET
Recv Send Send Utilization Service Demand
Socket Socket Message Elapsed Send Recv Send Recv
Size Size Size Time Throughput local remote local remote
bytes bytes bytes secs. 10^6bits/s % U % S us/KB us/KB
87380 16384 16384 10.00 261.73 -1.00 78.08 -1.000 24.438
[root@server1 etc]# netperf –help
Usage: netperf [global options] — [test options]
Global options:
-a send,recv Set the local send,recv buffer alignment
-A send,recv Set the remote send,recv buffer alignment
-B brandstr Specify a string to be emitted with brief output
-c [cpu_rate] Report local CPU usage
-C [cpu_rate] Report remote CPU usage
-d Increase debugging output
-D [secs,units] * Display interim results at least every secs seconds
using units as the initial guess for units per second
-f G|M|K|g|m|k Set the output units
-F fill_file Pre-fill buffers with data from fill_file
-h Display this text
-H name|ip,fam * Specify the target machine and/or local ip and family
-i max,min Specify the max and min number of iterations (15,1)
-I lvl[,intvl] Specify confidence level (95 or 99) (99)
and confidence interval in percentage (10)
-l testlen Specify test duration (>0 secs) (<0 bytes|trans)
-L name|ip,fam * Specify the local ip|name and address family
-o send,recv Set the local send,recv buffer offsets
-O send,recv Set the remote send,recv buffer offset
-n numcpu Set the number of processors for CPU util
-N Establish no control connection, do ‘send’ side only
-p port,lport* Specify netserver port number and/or local port
-P 0|1 Don’t/Do display test headers
-r Allow confidence to be hit on result only
-t testname Specify test to perform
-T lcpu,rcpu Request netperf/netserver be bound to local/remote cpu
-v verbosity Specify the verbosity level
-W send,recv Set the number of send,recv buffers
-v level Set the verbosity level (default 1, min 0)
-V Display the netperf version and exit
For those options taking two parms, at least one must be specified;
specifying one value without a comma will set both parms to that
value, specifying a value with a leading comma will set just the second
parm, a value with a trailing comma will set just the first. To set
each parm to unique values, specify both and separate them with a
comma.
* For these options taking two parms, specifying one value with no comma
will only set the first parms and will leave the second at the default
value. To set the second value it must be preceded with a comma or be a
comma-separated pair. This is to retain previous netperf behaviour.
[root@server1 etc]# netperf -H 10.10.10.131 — -M 1024
TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.10.10.131 (10.10.10.131) port 0 AF_INET
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
87380 16384 16384 10.21 275.12
[root@server1 etc]# netperf -H 10.10.10.131 — -m 1024
TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.10.10.131 (10.10.10.131) port 0 AF_INET
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
87380 16384 1024 10.00 207.06
[root@server1 etc]# netperf -t UDP_STREAM -H 10.10.10.131 — -m 1024
UDP UNIDIRECTIONAL SEND TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.10.10.131 (10.10.10.131) port 0 AF_INET
Socket Message Elapsed Messages
Size Size Time Okay Errors Throughput
bytes bytes secs # # 10^6bits/sec
1024 10.00 0 220.38
10.00 201.67
[root@server1 etc]# netperf -t TCP_RR -H 10.10.10.131 — -m 1024
TCP REQUEST/RESPONSE TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.10.10.131 (10.10.10.131) port 0 AF_INET
Local /Remote
Socket Size Request Resp. Elapsed Trans.
Send Recv Size Size Time Rate
bytes Bytes bytes bytes secs. per sec
16384 87380 1 1 10.00 1531.09
16384 87380
[root@server1 etc]# netperf -t TCP_RR -H 10.10.10.131
TCP REQUEST/RESPONSE TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.10.10.131 (10.10.10.131) port 0 AF_INET
send_tcp_rr: data recv error: Connection reset by peer
[root@server1 etc]# netperf -t TCP_RR -H 10.10.10.131 — -m 10000
TCP REQUEST/RESPONSE TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.10.10.131 (10.10.10.131) port 0 AF_INET
Local /Remote
Socket Size Request Resp. Elapsed Trans.
Send Recv Size Size Time Rate
bytes Bytes bytes bytes secs. per sec
16384 87380 1 1 10.00 1526.16
16384 87380
[root@server1 etc]# netperf -t UDP_RR -H 10.10.10.131 — -m 10000
UDP REQUEST/RESPONSE TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.10.10.131 (10.10.10.131) port 0 AF_INET
Local /Remote
Socket Size Request Resp. Elapsed Trans.
Send Recv Size Size Time Rate
bytes Bytes bytes bytes secs. per sec
1 1 10.00 1598.88
[root@server1 etc]#
发布者：全栈程序员-站长，转载请注明出处：https://javaforall.net/211966.html原文链接：https://javaforall.net
