Linux查看硬件信息命令

Linux查看硬件信息命令一 查看服务器硬件信息 1 查看服务器型号 序列号 root Master dmidecode grep SystemInform A9 egrep nbsp Manufacturer Product Serial nbsp nbsp 2 查看主板型号 root Master dmidecode grep A16 SystemInform nbsp

一、查看服务器硬件信息

(1)查看服务器型号、序列号

[root@Master ~]# dmidecode|grep “System Information” -A9|egrep  “Manufacturer|Product|Serial” 

Linux查看硬件信息命令

 (3)查看BIOS信息

复制代码

[root@Master ~]# dmidecode -t bios # dmidecode 2.12 SMBIOS 2.8 present. Handle 0x0008, DMI type 0, 24 bytes BIOS Information Vendor: HP Version: U19 Release Date: 12/27/2015 Address: 0xF0000 Runtime Size: 64 kB ROM Size: 16384 kB Characteristics: PCI is supported PNP is supported BIOS is upgradeable BIOS shadowing is allowed ESCD support is available Boot from CD is supported Selectable boot is supported EDD is supported 5.25"/360 kB floppy services are supported (int 13h) 5.25"/1.2 MB floppy services are supported (int 13h) 3.5"/720 kB floppy services are supported (int 13h) Print screen service is supported (int 5h) 8042 keyboard services are supported (int 9h) Serial services are supported (int 14h) Printer services are supported (int 17h) CGA/mono video services are supported (int 10h) ACPI is supported USB legacy is supported BIOS boot specification is supported Function key-initiated network boot is supported Targeted content distribution is supported UEFI is supported BIOS Revision: 2.0 Firmware Revision: 2.40

复制代码

  (3)查看内存槽及内存条

复制代码

[root@Master ~]# dmidecode -t memory | head -45 | tail -23 Memory Device Array Handle: 0x000A Error Information Handle: Not Provided Total Width: 72 bits Data Width: 64 bits Size: 16384 MB Form Factor: DIMM Set: None Locator: PROC 1 DIMM 1 Bank Locator: Not Specified Type: DDR4 Type Detail: Synchronous Registered (Buffered) Speed: 2133 MHz Manufacturer: HP Serial Number: Not Specified Asset Tag: Not Specified Part Number: -081 Rank: 2 Configured Clock Speed: 2133 MHz Minimum Voltage: 1.2 V Maximum Voltage: 1.2 V Configured Voltage: 1.2 V [root@Master ~]#

复制代码

  (4)查看网卡信息

复制代码

[root@Master ~]# dmesg | grep -i Ethernet igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k igb 0000:04:00.0: Intel(R) Gigabit Ethernet Network Connection igb 0000:04:00.1: Intel(R) Gigabit Ethernet Network Connection igb 0000:04:00.2: Intel(R) Gigabit Ethernet Network Connection igb 0000:04:00.3: Intel(R) Gigabit Ethernet Network Connection igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection igb 0000:02:00.1: Intel(R) Gigabit Ethernet Network Connection 

复制代码

(5) 查看pci信息,即主板所有硬件槽信息

复制代码

[root@Master ~]# lspci | head -10 00:00.0 Host bridge: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 DMI2 (rev 02) 00:01.0 PCI bridge: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 PCI Express Root Port 1 (rev 02) 00:01.1 PCI bridge: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 PCI Express Root Port 1 (rev 02) 00:02.0 PCI bridge: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 PCI Express Root Port 2 (rev 02) 00:02.1 PCI bridge: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 PCI Express Root Port 2 (rev 02) 00:02.2 PCI bridge: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 PCI Express Root Port 2 (rev 02) 00:02.3 PCI bridge: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 PCI Express Root Port 2 (rev 02) 00:03.0 PCI bridge: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 PCI Express Root Port 3 (rev 02) 00:03.1 PCI bridge: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 PCI Express Root Port 3 (rev 02) 00:03.2 PCI bridge: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 PCI Express Root Port 3 (rev 02)

复制代码

 

、查看CPU信息

(1)查看cpu型号

[root@Master ~]# cat /proc/cpuinfo | grep name | cut -f2 -d: | uniq -c 40 Intel(R) Xeon(R) CPU E5-2650 v3 @ 2.30GHz

(2)查看系统中实际物理CPU的数量(物理)

[root@Master ~]# grep 'physical id' /proc/cpuinfo | sort | uniq | wc -l 2

(3)系统中实际物理CPU的数量(核数)

[root@Master ~]# cat /proc/cpuinfo |grep 'processor'|wc -l 40

 (4)查看每个物理CPU中core的个数(即核数)

[root@Master ~]# cat /proc/cpuinfo |grep "cores"|uniq cpu cores : 10

(5)查看CPU的主频

[root@Master ~]# cat /proc/cpuinfo |grep MHz|uniq cpu MHz : 1200.000 cpu MHz : 2300.000 cpu MHz : 1200.000

(6)查看CPU的详细信息

复制代码

[root@Master ~]# cat /proc/cpuinfo | head -20 processor : 0 //逻辑处理器的ID vendor_id : GenuineIntel cpu family : 6 model : 63 model name : Intel(R) Xeon(R) CPU E5-2650 v3 @ 2.30GHz //CPU型号 stepping : 2 microcode : 54 cpu MHz : 1200.000 cache size : 25600 KB physical id : 0 siblings : 20 //相同物理封装处理器中逻辑处理器数 core id : 0 cpu cores : 10 //相同物理封装处理器中的内核数 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 15 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 fma cx16 xtpr pdcm pcid dca sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid fsgsbase bmi1 avx2 smep bmi2 erms invpcid cqm cqm_llc cqm_occup_llc

复制代码

 (7)查看CPU的相关信息

复制代码

[root@Master ~]# lscpu Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 40 On-line CPU(s) list: 0-39 Thread(s) per core: 2 Core(s) per socket: 10 Socket(s): 2 NUMA node(s): 2 Vendor ID: GenuineIntel CPU family: 6 Model: 63 Model name: Intel(R) Xeon(R) CPU E5-2650 v3 @ 2.30GHz Stepping: 2 CPU MHz: 1200.000 BogoMIPS: 4594.43 Virtualization: VT-x L1d cache: 32K L1i cache: 32K L2 cache: 256K L3 cache: 25600K NUMA node0 CPU(s): 0-9,20-29 NUMA node1 CPU(s): 10-19,30-39 [root@Master ~]# 

复制代码

 (8)查看cpu运行模式

[root@Master ~]# getconf LONG_BIT 64

 (9)查看cpu是否支持64bit

[root@Master ~]# cat /proc/cpuinfo | grep flags | grep ' lm ' | wc -l 40 (结果大于0, 说明支持64bit计算. lm指long mode, 支持lm则是64bit)

 

、查看内存信息
(1)查看内存硬件信息

复制代码

root@Master ~]# dmidecode -t memory | head -45 | tail -24 Handle 0x000C, DMI type 17, 40 bytes Memory Device Array Handle: 0x000A Error Information Handle: Not Provided Total Width: 72 bits Data Width: 64 bits Size: 16384 MB Form Factor: DIMM Set: None Locator: PROC 1 DIMM 1 Bank Locator: Not Specified Type: DDR4 Type Detail: Synchronous Registered (Buffered) Speed: 2133 MHz Manufacturer: HP Serial Number: Not Specified Asset Tag: Not Specified Part Number: -081 Rank: 2 Configured Clock Speed: 2133 MHz Minimum Voltage: 1.2 V Maximum Voltage: 1.2 V Configured Voltage: 1.2 V

复制代码

Linux查看硬件信息命令

 (5)Linux 查看内存的详细信息:

复制代码

[root@Master ~]# cat /proc/meminfo |head -20 MemTotal:  kB MemFree:  kB Buffers:  kB Cached:  kB SwapCached: 1320 kB Active:  kB Inactive:  kB Active(anon):  kB Inactive(anon):  kB Active(file):  kB Inactive(file):  kB Unevictable:  kB Mlocked:  kB SwapTotal:  kB SwapFree:  kB Dirty: 180 kB Writeback: 0 kB AnonPages:  kB Mapped:  kB Shmem: 172 kB

复制代码

(6)Linux 查看内存的使用情况

[root@Master ~]# free -m // -b,-k,-m,-g show output in bytes, KB, MB, or GB total used free shared buffers cached Mem:   5398 0 1015  -/+ buffers/cache: 18918  Swap: 16383 38 16345

 

 四、查看硬盘信息
(1)查看挂接的分区状态
[root@Master ~]# fdisk -l |grep Disk
Linux查看硬件信息命令


(2)查看硬盘和分区分布

复制代码

[root@Master ~]# lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 0 279.4G 0 disk ├─sda1 8:1 0 50M 0 part /boot ├─sda2 8:2 0 100G 0 part / ├─sda3 8:3 0 50G 0 part /home ├─sda4 8:4 0 1K 0 part ├─sda5 8:5 0 16G 0 part [SWAP] ├─sda6 8:6 0 13.3G 0 part /tmp └─sda7 8:7 0 100G 0 part /usr sdb 8:16 0 83.7T 0 disk └─sdb1 8:17 0 83.7T 0 part /PureDisk

复制代码

 (3)查看硬盘和分区的详细信息

复制代码

[root@Master ~]# fdisk -l Disk /dev/sda: 300.0 GB, 8 bytes 255 heads, 63 sectors/track, 36468 cylinders Units = cylinders of 16065 * 512 =  bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal):  bytes /  bytes Disk identifier: 0x000384d9 Device Boot Start End Blocks Id System /dev/sda1 * 1 7 51200 83 Linux Partition 1 does not end on cylinder boundary. /dev/sda2 7 13061  83 Linux /dev/sda3 13061 19588  83 Linux /dev/sda4 19588 36469  5 Extended /dev/sda5 19588 21677  82 Linux swap / Solaris /dev/sda6 21677 23415  83 Linux /dev/sda7 23416 36469  83 Linux WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sdb: 92017.3 GB, 464 bytes 255 heads, 63 sectors/track,  cylinders Units = cylinders of 16065 * 512 =  bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal):  bytes /  bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1  + ee GPT Partition 1 does not start on physical sector boundary.

复制代码

 (4)查看挂接的分区状态

复制代码

[root@Master ~]# mount | column -t /dev/sda2 on / type ext4 (rw) proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) devpts on /dev/pts type devpts (rw,gid=5,mode=620) tmpfs on /dev/shm type tmpfs (rw) /dev/sda1 on /boot type ext4 (rw) /dev/sda3 on /home type ext4 (rw) /dev/sda6 on /tmp type ext4 (rw) /dev/sda7 on /usr type ext4 (rw) /dev/sdb1 on /PureDisk type ext4 (rw) none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw

复制代码

 (5)查看挂接的分区状态

[root@Master ~]# swapon -s Filename Type Size Used Priority /dev/sda5 partition  39676 -1

 (6)查看硬盘使用情况

复制代码

[root@Master ~]# df -hT Filesystem Type Size Used Avail Use% Mounted on /dev/sda2 ext4 99G 561M 93G 1% / tmpfs tmpfs 63G 76K 63G 1% /dev/shm /dev/sda1 ext4 45M 38M 4.9M 89% /boot /dev/sda3 ext4 50G 52M 47G 1% /home /dev/sda6 ext4 13G 34M 13G 1% /tmp /dev/sda7 ext4 99G 21G 73G 23% /usr /dev/sdb1 ext4 84T 41T 40T 51% /PureDisk

复制代码

 (7) 硬盘检测命令smartctl

复制代码

[root@Master ~]# smartctl -a /dev/sda smartctl 5.43 2012-06-30 r3573 [x86_64-linux-2.6.32-642.el6.x86_64] (local build) Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net Vendor: HP Product: LOGICAL VOLUME Revision: 3.56 User Capacity: 299,966,445,568 bytes [299 GB] Logical block size: 512 bytes Logical Unit id: 0xb1001cc8a1b9ec4dacc5ab35dc Serial number: PDNNK0BRH9U0AG Device type: disk Local Time is: Mon Feb 5 13:13:33 2018 CST Device supports SMART and is Enabled Temperature Warning Disabled or Not Supported SMART Health Status: OK Error Counter logging not supported Device does not support Self Test logging

复制代码

 

五、查看网卡信息

   (2)查看系统的所有网络接口

[root@Master ~]# ifconfig -a [root@Master ~]# ip link show

    (3)查看某个网络接口的详细信息,例如eth0的详细参数和指标

复制代码

[root@Master ~]# ethtool eth0 Settings for eth0: Supported ports: [ FIBRE ] Supported link modes: 10000baseT/Full Supported pause frame use: No Supports auto-negotiation: No Advertised link modes: 10000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: No Speed: 10000Mb/s Duplex: Full Port: FIBRE PHYAD: 0 Transceiver: external Auto-negotiation: off Supports Wake-on: d Wake-on: d Current message level: 0x00000007 (7) drv probe link Link detected: yes

复制代码

    (4)查看所有网卡的链路状态

复制代码

[root@Master ~]# for i in `seq 0 9`;do ethtool eth${i} | egrep 'eth|Link';done Settings for eth0: Link detected: yes Settings for eth1: Link detected: yes Settings for eth2: Link detected: no Settings for eth3: Link detected: no Settings for eth4: Link detected: no Settings for eth5: Link detected: no Settings for eth6: Link detected: no Settings for eth7: Link detected: no Settings for eth8: Link detected: no Settings for eth9: Link detected: no

复制代码

 

 六、列出所有PCI设备信息

复制代码

[root@Master ~]# lspci -tv | more -+-[0000:ff]-+-08.0 Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 QPI Link 0 | +-08.3 Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 QPI Link 0 | +-09.0 Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 QPI Link 1 | +-09.3 Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 QPI Link 1 | +-0b.0 Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 R3 QPI Link 0 & 1 Monitoring | +-0b.1 Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 R3 QPI Link 0 & 1 Monitoring | +-0b.2 Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 R3 QPI Link 0 & 1 Monitoring | +-0c.0 Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Unicast Registers | +-0c.1 Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Unicast Registers | +-0c.2 Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Unicast Registers | +-0c.3 Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Unicast Registers | +-0c.4 Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Unicast Registers | +-0c.5 Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Unicast Registers | +-0c.6 Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Unicast Registers | +-0c.7 Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Unicast Registers | +-0d.0 Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Unicast Registers | +-0d.1 Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Unicast Registers | +-0f.0 Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Buffered Ring Agent | +-0f.1 Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Buffered Ring Agent | +-0f.2 Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Buffered Ring Agent | +-0f.3 Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Buffered Ring Agent

复制代码

版权声明:本文内容由互联网用户自发贡献,该文观点仅代表作者本人。本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如发现本站有涉嫌侵权/违法违规的内容, 请联系我们举报,一经查实,本站将立刻删除。

发布者:全栈程序员-站长,转载请注明出处:https://javaforall.net/231965.html原文链接:https://javaforall.net

(0)
全栈程序员-站长的头像全栈程序员-站长


相关推荐

  • python的input格式_javascript设计模式与开发实践 pdf

    python的input格式_javascript设计模式与开发实践 pdffileinput模块可以对一个或多个文件中的内容进行迭代、遍历等操作。该模块的input()函数有点类似文件readlines()方法,区别在于:前者是一个迭代对象,即每次只生成一行,需要用for循环迭代。后者是一次性读取所有行。在碰到大文件的读取时,前者无疑效率更高效。用fileinput对文件进行循环遍历,格式化输出,查找、替换等操作,非常方便。【典型用法】importfileinputf…

    2022年5月3日
    57
  • Linux中修改文件权限方法「建议收藏」

    Linux中修改文件权限方法「建议收藏」​一、文件类型在Linux操作系统中,一切皆文件,Linux不以扩展名来区分文件类型,而是在文件属性中有一列专门记录文件类型。普通文件:.c.cpp.h.txt.pdf用’-‘表示目录文件(文件夹):用’d‘表示管道文件(用于进程间通信的一种文件):用’p’表示链接文件(相当于Windows上的快捷方式):用’l’表示设备文件:字符设备文件(c)块设备文件(b)套接字(s)用ls-l查看文件属性信息

    2025年8月30日
    6
  • generator的作用_对服从与执行的理解

    generator的作用_对服从与执行的理解理解 Generator 的执行

    2022年4月20日
    36
  • javascript 数组排序(三种方法)

    javascript 数组排序(三种方法)一、用sort()方法进行数组排序vararr1=[20,80,54,78,8,67,27]; functionmy(a,b){ returna-b; } console.log(arr1.sort(my));//8,20,27,54,67,78,80二、冒泡排序vararr1=[20,80,54,78,8,67,27]; functionmys(arr1){ for(vari=0;i<arr1.length-1;

    2022年6月11日
    31
  • Java中的快捷键大全「建议收藏」

    Java中的快捷键大全「建议收藏」1.常用快捷键(1)Ctrl+Space说明:内容助理。提供对方法,变量,参数,javadoc等得提示,应运在多种场合,总之需要提示的时候可先按此快捷键。注:避免输入法的切换设置与此设置冲突(2)Ctrl+Shift+Space说明:变量提示(3)Ctrl+/说明:添加/消除//注释,在eclipse2.0中,消除注释为Ctrl+\(4)Ctrl+Shift+/

    2022年7月8日
    20
  • 本地测试读取redis和普通文件缓存的速度,redis慢一倍?

    本地测试读取redis和普通文件缓存的速度,redis慢一倍?

    2021年10月16日
    48

发表回复

您的邮箱地址不会被公开。 必填项已用 * 标注

关注全栈程序员社区公众号